First process tear out concrete. Second step install plumbing for shower, sink & toilet in open floor, pour concrete. Third step seal outside wall with drylock water proofing and frame in all walls. Glass block windows before & after. Fourth step Installed electrical,heating, plumbing,insulation and 6 mil plastic to keep out moister on outside walls,then drywall. Fifth step mud,tape & sand drywall. Install1/2inch concrete board in shower,tape all seams & thinset all seams Add new concrete to shower & bathroom floor to level floors to make tiling surface flat and level.Install shower drain.Sixth step: Paint rubber seal on shower floor for leak protection, two coats forms a rubber seal like a liner.Lay out pattern on floor and walls. All lines must be straight and level. use a chalk line and a 2 or 4 foot level and mark with a pencil. mix thinset to a peanut butter consistency and spread using a 1/4 inch trowel.use non sanded grout for 1/8 inch spacing or follow instructions on grout bag.Seal all corners with silicone caulk that matches your grout color. Install shower door & bathroom door. Paint walls using a paint with primer in it & install heat register cover.
Wheel chair ramp installed and painted with slip proof traction floor stain.
All Skill Construction is now building its online home! We will continue to update all of our jobs that are currently in progress. If any one has any questions about a project or will be doing a similar project and would like some advise on how too. Feel free to contact us.